Open-shell localized Hartree-Fock method based on the generalized adiabatic connection Kohn-Sham formalism for a self-consistent treatment of excited states

An effective exact-exchange Kohn-Sham approach for the treatment of excited electronic states, the generalized adiabatic connection open-shell localized Hartree-Fock (GAC-OSLHF) method is presented. The GAC-OSLHF method is based on the generalized adiabatic connection Kohn-Sham formalism and therefore capable of treating excited electronic states, which are not the energetically lowest of their symmetry. The method is self-interaction free and allows for a fully self-consistent computation of excited valence as well as Rydberg states. Results for atoms and small- and medium-size molecules are presented and compared to restricted open-shell Hartree-Fock (ROHF) and time-dependent density-functional results as well as to experimental data. While GAC-OSLHF and ROHF results are quite close to each other, the GAC-OSLHF method shows a much better convergence behavior. Moreover, the GAC-OSLHF method as a Kohn-Sham method, in contrast to the ROHF approach, represents a framework which allows also for a treatment of correlation besides an exchange by appropriate functionals. In contrast to the common time-dependent density-functional methods, the GAC-OSLHF approach is capable of treating doubly or multiply excited states and can be easily applied to molecules with an open-shell ground state. On the nodal planes of the energetically highest occupied orbital, the local multiplicative GAC-OSLHF exchange potential asymptotically approaches a different, i.e., nonzero, value than in other regions, an asymptotic behavior which is known from exact Kohn-Sham exchange potentials of ground states of molecules.     

A pyrazine bis‐adduct of a binuclear rhodium(II) carboxylate containing 3,4,5‐triethoxybenzoate as the ­equatorial ligand

The title compound, tetrakis(μ‐3,4,5‐triethoxy­benzoato‐κ²O:O′)­bis­[(pyrazine‐κN)­rhodium(II)](Rh—Rh), [Rh₂(C₁₃H₁₇O₅)₄(C₄H₄N₂)₂], crystallizes on an inversion centre in the triclinic space group . The equatorial carboxyl­ate ligands bridge the two Rh^II atoms, giving a binuclear lantern‐like structure. The pyrazine mol­ecules occupy the two axial coordination sites. The phenyl rings are tilted by ca 10° with respect to the attached carboxyl­ate groups. The pyrazine planes have a torsion angle of ca 19° around the Rh—N bond with respect to the plane of the nearer carboxyl­ate group and are not coplanar with the Rh—Rh bond.     

Synthesis and characterization of trifluoromethyl fluoroformyl peroxycarbonate,CF3OC(O)OOC(O)F

The synthesis of CF(3)OC(O)OOC(O)F is accomplished by the photolysis of a mixture of (CF(3)CO)(2)O, FC(O)C(O)F, CO, and O(2) at -15 degrees C using a low-pressure mercury lamp. The new peroxide is obtained in pure form in low yield after repeated trap-to-trap condensation and is characterized by NMR, IR, Raman, and UV spectroscopy. Geometrical parameters were studied by ab initio methods [B3LYP/6-311+G(d)]. At room temperature, CF(3)OC(O)OOC(O)F is stable for many days in the liquid or gaseous state. The melting point is -87 degrees C, and the boiling point is extrapolated to 45 degrees C from the vapor pressure curve log p = 8.384 - 1715/T (p/mbar, T/K). A possible mechanism for the formation of CF(3)OC(O)OOC(O)F is discussed, and its properties are compared with those of related compounds.     

The ionized methylene transfer from the distonic radical cation +CH2-O-CH2 to heterocyclic compounds. A pentaquadrupole mass spectrometric study

Ion-molecule reactions of the mass-selected distonic radical cation ⁺CH₂-O-CH ₂ ^· (1) with several heterocyclic compounds have been investigated by multiple stage mass spectro- metric experiments performed in a pentaquadrupole mass spectrometer. Reactions with pyridine, 2-, 3-, and 4-ethyl, 2-methoxy, and 2-n-propyl pyridine occur mainly by transfer of CH ₂ ^+· to the nitrogen, which yields distonic N-methylene-pyridinium radical cations. The MS³ spectra of these products display very characteristic collision-induced dissociation chemistry, which is greatly affected by the position of the substituent in the pyridine ring. Ortho isomers undergo a δ-cleavage cyclization process induced by the free-radical character of the N-methylene group that yields bicyclic pyridinium cations. On the other hand, extensive CH ₂ ^+· transfer followed by rapid hydrogen atom loss, that is, a net CH⁺ transfer, occurs not to the heteroatoms, but to the aromatic ring of furan, thiophene, pyrrole, and N-methyl pyrrole. The reaction proceeds through five- to six-membered ring expansion, which yields the pyrilium, thiapyrilium, N-protonated, and N-methylated pyridine cations, respectively, as indicated by MS³ scans. Ion 1 fails to transfer CH ₂ ^+· to tetrahydrofuran, whereas a new α-distonic sulfur ion is formed in reactions with tetrahydrothiophene. Unstable N-methylene distonic ions, likely formed by transfer of CH ₂ ^+· to the nitrogen of piperidine and pyrrolidine, undergo rapid fragmentation by loss of the α-NH hydrogen to yield closed-shell immonium cations. The most thermodynamically favorable products are formed in these reactions, as estimated by ab initio calculations at the MP2/6-31G(d,p)//6-31G(d,p) + ZPE level of theory.     

Fluid-like behavior of a one-dimensional granular gas

We study the properties of a one-dimensional (1D) granular gas consisting of N hard rods on a line of length L (with periodic boundary conditions). The particles collide inelastically and are fluidized by a heat bath at temperature Tb and viscosity gamma. The analysis is supported by molecular dynamics simulations. The average properties of the system are first discussed, focusing on the relations between granular temperature Tg=mv2, kinetic pressure, and density rho=N/L. Thereafter, we consider the fluctuations around the average behavior obtaining a slightly non-Gaussian behavior of the velocity distributions and a spatially correlated velocity field; the density field displays clustering: this is reflected in the structure factor which has a peak in the k approximately 0 region suggesting an analogy between inelastic hard core interactions and an effective attractive potential. Finally, we study the transport properties, showing the typical subdiffusive behavior of 1D stochastically driven systems, i.e., approximately Dt(1/2), where D for the inelastic fluid is larger than the elastic case. This is directly related to the peak of the structure factor at small wave vectors.     

12-Acylindolo[1,2-c]quinazolines by palladium-catalyzed cyclocarbonylation of o-alkynyltrifluoroacetanilides

6-Trifluoromethyl-12-acylindolo[1,2-c]quinazolines are prepared in high yield through the palladium-catalyzed reaction of bis(o-trifluoroacetamidophenyl)acetylene with aryl or vinyl halides and triflates. The reaction, which tolerates a variety of important functional groups, probably involves the formation of a 3-acyl-2-(o-trifluoroacetamidophenyl)indole intermediate, followed by its cyclization to the indoloquinazoline product. [reaction: see text]     

A liquid crystal derived from ­ruthenium(II,III) and a long‐chain carboxylate

The title compound, catena‐poly[[tetrakis(μ‐decanoato‐κ²O:O′)diruthenium(II,III)(Ru—Ru)]‐μ‐octanesulfonato‐κ²O:O′], [Ru₂(C₁₀H₁₉O₂)₄(C₈H₁₇O₃S)], is an octane­sulfonate derivative of the mixed‐valence complex diruthenium tetradecanoate. The equatorial carboxyl­ate ligands are bidentate, bridging two Ru atoms to form a dinuclear structure. Each of the two independent dinuclear metal complexes in the asymmetric unit is located at an inversion centre. The octane­sulfonate anion bridges the two dinuclear units through axial coordination. The alkyl chains of the carboxyl­ate and sulfonate ligands are arranged in a parallel manner. The global structure can be seen as infinite chains of polar moieties separated by a double layer of non‐polar alkyl groups, without interdigitation of the alkyl chains.     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.     

Convenient Esterification of Carboxylic Acids by SN2 Reaction Promoted by a Protic Ionic-Liquid System Formed in Situ in Solvent-Free Conditions

The reaction of esterification of benzoic acid with benzyl chloride was chosen as a model reaction to study the esterification by S_N2 promoted by tertiary amine as deprotonating agent. The use of ionic liquid (IL) 1,3-dimethylimidazolium methanesulfonate [MMIm][OMs] as reaction medium has proven to give quantitative yield of the ester, but interestingly the reaction does occur even in solvent-free conditions, where the acid + the amine form a liquid system (a protic IL) in situ. This last methodology was extended to several carboxylic acids in conditions of atom economy (i.e., without excess of any reagent), giving moderately good yields of esters (54–78%) recovered by weight in pure form.     

Simulation of mesogenic diruthenium tetracarboxylates: Development of a force field for coordination polymers of the MMX type

A classical molecular mechanics force field, able to simulate coordination polymers (CP) based on ruthenium carboxylates (Ru₂(O₂CR_eq)₄L_ax) (eq = equatorial group containing aliphatic chains, L_ax= axial ligand), has been developed. New parameters extracted from experimental data and quantum calculations on short aliphatic chains model systems were included in the generalized AMBER force field. The proposed parametrization was evaluated using model systems with known structure, containing either short or long aliphatic chains; experimental results were reproduced satisfactorily. This modified force field, although in a preliminary stage, could then be applied to long chain liquid crystalline compounds. The resulting atomistic simulations allowed assessing the relative influence of the factors determining the CP conformation, determinant for the physical properties of these materials. © 2013 Wiley Periodicals, Inc.